Style selections 6923WWMV Manual De Instrucciones página 8

ASSEMBLY INSTRUCTIONS
7. Fasten the bottom shelf (A) to the left and right
upper panels (D and E) using large screws (H1),
as shown.
NOTE: All holes on the fixed shelf (B) are
facing down.
Hardware Used
8. Lay unit face down on floor and attach the
back panel (I) using nails (H3), as shown.
NOTE: The unfinished side of the back panel (I)
is facing up.
Hardware Used
H3
Nail
9. Carefully place top assembly onto bottom assembly,
aligning cam bolts (H4) with the holes on the lower
side panels (G) and insert snap cams (H5) into the
holes in the lower side panels (G).
NOTE: If necessary, tap the snap cams (H5) with a
hammer (not included) to secure the top assembly
to the bottom assembly.
Hardware Used
H5
Snap Cam
IS6923
7
8
x 24
9
x 2
8
D
E
A
H1
I
E
H5
G