Cleaning The Humidification Filter; Replacing The Humidification Filter - Philips HU4801 Manual Del Usuario

Ocultar thumbs Ver también para HU4801:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
6 Cleaning the
humidification
filter
Clean the humidification filter every
week to keep it hygienic.
1
Switch off the humidifier and unplug
it (fig g).
2
Hold by both sides of the upper unit
and lift it up (fig b).
3
Take out the humidification filter
and the filter support from the water
tank (fig h).
4
Remove the humidification filter
from the filter support (fig i).
5
Soak the humidification filter in tap
water for one hour (fig j).
6
Rinse the humidification filter under
a slowly running tap (fig k).
7
Let excess water drip off the
humidification filter.
8
Assemble the humidification filter
round the filter support (fig l).
9
Put the humidification filter and the
filter support back into the water
tank (fig m).
10
Place the upper unit back onto the
water tank (fig d).
Note
Do not squeeze or wring the filter. This
might damage the filter and impact
humidification performance.
Do not dry the filter under direct
sunlight, unless it is assembled back
onto the filter support
EN
8
7 Replacing the
humidification
filter
Replace the humidification filter every
three months for optimal performance.
If the filter is in good condition, you
could use it for a longer period of time.
Make sure to replace the humidification
filter at least once a year.
Note
Use only Philips original humidification filter
HU4102.
Tip
Register your product at www.philips.com for
further information on how to replace your filter.
1
Switch off the humidifier and unplug
it (fig g).
2
Hold by both sides of the upper unit
and lift it up (fig b).
3
Take out the humidification filter
and the filter support from the water
tank (fig h).
4
Remove the humidification filter
from the filter support (fig i).
5
Remove the packaging material of
the new humidification filter (fig n).
6
Assemble the new humidification
filter around the filter support
(fig l).
7
Put the filter and the filter support
back into the water tank (fig m).
8
Place the upper unit back onto the
water tank (fig d).
Tip
You can easily find more information about
how to replace the filter in our web page or by
calling our Consumer Care Center.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido