Function Buttons; Stitch Width Adjustment Button - Singer ET-1 Manual De Instrucciones

FUNCTION BUTTONS

FUNCTION BUTTONS

Stitch width adjustment button

When you select a stitch, the machine will
automatically set the recommended stitch width,
which will be indicated by numbers on the LCD
screen. The stitch width can be regulated by
pressing the stitch width adjustment buttons.
Certain stitches have a limited stitch width.
For a narrower stitch, press the "
For a wider stitch, press the " + " button (right).
The stitch width can be adjusted between "0.0-
7.0".
Certain stitches have a limited stitch width.
When Direct Patterns 1-4, and A Group Pattern
00 are selected, the needle position is
regulated by the stitch width adjustment
buttons. Pressing the "
move the needle to the left and pressing the "
+ " button (right), will move the needle to the
right. The numbers will be changed from left
position "0.0" to extreme right position "7.0".
The pre-set center needle position will be
indicated as "3.5".
26
Mode selection button
Stitch width
adjustment buttons
Stitch length
adjustment buttons
Twin needle button
Mirror button
Elongation button
" button (left).
" button (left), will