Technical Specifications - FLAEM Aspira Instrucciones Para El Uso

CANISTER HOLDER
For convenience, the canister holder can be detached and reattached on the most suitable side (left or right) as
shown in the figure:

TECHNICAL SPECIFICATIONS

Mod. P1211EM - Mod. P1211EM Plus
Non-lubricated rotary piston suction pump with thermal protection.
Power source/power
Fuse
Device dimensions
Weight
Noise (at 1 m)
Use
In accordance with EEC Directive 93/42
APPLIED PARTS
Type BF applied parts are:
Operating conditions:
Storage conditions:
Operating/storage
atmospheric pressure:
Suction:
Adjustable vacuum level:
Max air flow:
Using a tool, unfasten the canister holder from the bottom of the
device
and rotate it in order to release it.
Refasten it, using the inverse procedure, on the selected side.
Ensure that the canister holder is properly fastened to the bot-
tom of the device. This system allows up to two canister holders
to be connected.
230 V ~ 50 Hz / 210 VA
1 x T2A 250V
32.5 (L) x 12 (W ) x 23.5 (H) cm
2.4 Kg
56 dB (A) (approx.)
Continuous
0051
patient accessories (16)
Temperature min. 5°C; max. 35°C
Relative humidity min. 10%; max. 95%
Temperature min. -25°C; max 70°C
Relative humidity min. 10%; max. 95%
min. 690 hPa; max. 1060 hPa
Mod. P1211EM
high vacuum / low flow
from -0,05 a -0,86 bar approx
(accuracy class 2.5)
approx 13.5 l/min
14
Mod. P1211EM Plus
high vacuum / high flow
from -0,05 a -0,82 bar approx
(accuracy class 2.5)
approx 20 l/min