Safety Instructions; Important Safety Instructions For Wide Range Wall Power Supplies; Installation - Lehmannaudio Black Cube Statement Manual De Instrucciones

34 Black Cube Statement
Important safety instructions
EN
for wide range wall power supplies
The operating manual must be read carefully prior to use, stored in a safe place and
≠
followed.
Only use the included power supply.
≠
In case of visible damage to the housing or cables, do not use the power supply.
≠
The wall power supply is not suitable for outdoor operation.
≠
Make sure that the wall power supply:
≠
- Is properly plugged into the outlet
- Is easily accessible and in good condition
- Is only used within the allowable temperature range (ambient temperature of 0°C
to +40°C (up to 90% relative humidity, non-condensing). Storage temperature:
-40°C to +70°C (10% to 95% relative humidity)
- Is not uncovered or exposed to sunlight for extended periods
- Is not overheated, and is adequately cooled
The device should never be installed or stored in the following locations, since
≠
damage may occur during operation:
- Locations exposed to high moisture levels and/or condensation
- Locations exposed to various environmental influences
- Locations exposed to continuous vibrations
- Locations exposed to pronounced temperature fluctuations
Only use accessories such as line adapters recommended by the manufacturer
≠
Disconnect the wall power supply from the outlet:
≠
- When the device is not being used for a longer time
- During a thunderstorm
Never pull on the cable to disconnect the device from the mains network.
≠
Only use the wall power supply with power sources that meet the specifications in
≠
the section „Technical data".
Make sure that using the wall power supply does not overload the outlet or an
≠
extension cord. Otherwise there is a risk of fire or electric shock.
The power supply does not require maintenance. Opening it is prohibited (risk of
≠
electric shock).
Modifying the power supply is prohibited (voids the warranty).
≠
The device may only be repaired by authorised, qualified personnel.
≠

Installation

This section tells you about the connections, control elements
and application possibilities of your Lehmannaudio Black Cube
Statement phono amplifier.
1 | Unpacking
After unpacking the Black Cube Statement check it for possible transport dam-
ages. If you notice visible damages, you must by no means connect the device to
mains. In this case consult your dealer immediately.
Delivery includes the following components:
Black Cube Statement device
≠
Power supply with matching primary
≠
adapter
Operating manual
≠
Black Cube Statement
Allen key (2 mm)
≠
4 Jumpers
≠
Guarantee voucher
≠
35
EN