Aicok KE0131Y-GS Manual Del Usuario página 8

KNOW YOUR ELECTRIC KETTLE
BEFORE USING YOUR KETTLE
If you are using the kettle for the first time, it is recommended that you should clean
your kettle before use by boiling the Max capacity of water once and then discarding
the water twice. Wipe the surface with a damp cloth.
NOTE: The max capacity of kettle is 1.7L.
USING YOUR ELECTRIC KETTLE
1. Place the kettle on the flat surface.
2. To fill the kettle, remove it from the power base and open the lid by pressing down
lid release button, then fill the kettle with the desired amount of water and close the
lid. The water level must be within the Min and the Max level. Too little water will
cause the kettle switching off before the water has boiled.
NOTE: Do not fill the water over the maximum level, as water may spill out of the
spout when boiling. Ensure that the lid is firmly in place before plugging the power
outlet.
3. Position the kettle on the power base.
4. Connect the plug into a power outlet. Press down the switch and the indicator will
4