Residual Risks; Intended Use; Technical Data - Rebel RB-1060 Manual De Usuario

• Never block the inflating or deflating outlets when operating. Ensure proper ventilation
in the work area.
• Remove the adapter from the clip-on tire valve. Do not store the power tool with the
adapter attached.
• The pressure gauge on the air pump is for reference only and is therefore not binding
for exact values. To reduce the risk of over inflation, use a reliable pressure gauge
periodically during inflation.
• Never leave the air pump unattended with the hose attached to the object being
inflated.
• To avoid over inflation and bursting carefully monitor object during inflation.

Residual risks

Even when the power tool is used as prescribed it is not possible to eliminate all residual risk
factors. The following hazards may arise in connection with the power tool's construction
and design:
• Health defects resulting from vibration emission if the power tool is being used over
longer period of time or not adequately managed and properly maintained.
• Injuries and damage to property to due to broken accessories that are suddenly dashed.
Warning!
This power tool produces an electromagnetic field during operation. This field may under
some circumstances interfere with active or passive medical implants. To reduce the risk
of serious or fatal injury, we recommend persons with medical implants to consult their
physician and the medical implant manufacturer before operating this power tool.
INFORMATION ABOUT THE POWER TOOL

Intended use

This cordless air pump is intended for inflating bicycle and car tires as well as inflatable
objects such as sport balls, air beds and children's toys. Do not use this air pump for
pumping up inflatable objects with a large volume such as boats.
Use the power tool for its intended purpose only. Any other use is deemed to be a case
of misuse. The user/owner of this power tool, not the producer, is responsible for any
damages or injuries caused by improper handling of this power tool.

Technical data

Battery
Charging time
AC charger (RB-2001-CH)
Air volume
EN
20 V; 2 Ah; Li-Ion (RB-2001)
1-1,5 h
Input 220 – 240 V; 50/60 Hz
Output 21 V; 2,2 A
15 l/min
34