Using Jabra Bt200 Bluetooth Phones; Audio & Visual Indicators - Jabra BT200 Manual Del Usuario

Using JABRA BT200 with Bluetooth Phones
If you purchase a new Bluetooth enabled mobile phone you only need to pair the
headset and phone together. You do not need to but a new headset product – the JABRA
BT200 headset only will then work with the Bluetooth phone without the need for the
multi-adapter or phone connector.
Audio & Visual Indicators
Indicator Light Chart
Headset State LED Indication State
Power Off LED OFF
Standby Mode LED ON – Flashes every 3 seconds
Charging In Process LED ON – (while in charging cradle)
Charging Complete LED OFF – (while in charging cradle)
Low Power LED ON – Rapid flashes
Pairing Mode LED ON – Constant
Pairing Successful LED – Series of blue rapid flashes
Active / On Call Indicator LED – Flashes every second
22
Multi-Adapter State LED Indication State
Power ON LED ON – with JABRA BT200 in the multi-adapter
Pairing Mode LED ON – with JABRA BT200 in the multi-adapter
Standby Mode Flashes every 3 seconds – no audio link between
headset & adapter
Active Mode Flashes every 1 second – call in progress and linked.
Audio Indicator Chart
Headset State Audio Indication
Volume limit Repeated single tone when either lower or upper
limit achieved
Low Battery Tone Three rapid tones repeated every 30 seconds
Out of Range No audio indications, deterioration of audio quality will
alert user
Incoming Call Ring tone
Pairing Confirmation Single High Pitch Tone
Active Mode Quick series of 4 tones – low to high.
Power On/OFF Quick Series of 4 Tones – low to high pitch.
23