VWR 10048-618 Manual Del Usuario página 6

the channel reading went out of range, and the date and time the channel reading returned to within
range.
VIEWING THE MEMORY CAPACITY
Slide the MEM VIEW switch to the ON position.
The first line will display the current percentage of memory full. The second line will display the
number of days remaining before memory is full at the current logging interval. The third line will
display the current logging interval.
CLEARING THE MEMORY
Slide the MEM VIEW switch to the ON position.
Press the CLEAR SILENCE ALM button to clear all recorded data and alarm events.
Note: The MEM symbol will become active on the display when the memory is full. Once the
memory is full, the oldest data points will be overwritten with new data.
SETTING THE LOGGING INTERVAL
Slide the MEM VIEW switch to the ON position. The first line will display the current percentage of
memory full. The second line will display the number of days remaining before memory is full at
the current logging interval. The third line will display the current logging interval.
To increment the logging interval, press the ADVANCE button. The minimum logging interval is one
minute (0:01). The maximum logging rate is 24 hours (24:00). Once 24 hours is selected, the
next subsequent press of the ADVANCE button will return to one minute.
VIEWING UNIQUE DEVICE ID NUMBER
1. Slide the MEM VIEW switch to the ON position.
2. Press the EVENT DISPLAY button. The second and third lines will display the first eight digits of
the ID number.
3. Press the EVENT DISPLAY button a second time. The second and third lines will display the
last eight digits of the ID number.
4. Press the EVENT DISPLAY button to return to the default display.
DOWNLOADING STORED DATA
1. The data can be downloaded directly to a USB Mass Storage Flash Drive. To begin the
download, insert the USB flash drive into the USB port located on the left side of the thermometer.
2. The download will begin automatically upon insert. The P1 LED will turn on to indicate the
download process has begun.
3. Once the download process is complete, the LED will turn off. Do not remove the USB drive
until the process is complete.
4. The data transfer rate is approximately 55 data points per second.
Note: The USB download will not occur if the battery LCD symbol is active. Plug the supplied AC
adapter into the thermometer to provide sufficient power for USB operation.
REVIEWING STORED DATA
The downloaded data is stored in a comma-delimited CSV file on the flash drive. The filename
VWR Collection Manual ver 3, rel 5 30.10.2013