Cleaning And Sterilising; Cleaning (Figure A In Reverse Order) - NUK BP7 Instrucciones De Operación

Ocultar thumbs Ver también para BP7:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 68
+
First Choice
model display (LED)
The symbols light up when the appropriate
function is active.
28 Displays the suction rhythm
29 Memory function
Flashing: current pumping session is
being saved
Constant: saved pumping session is
running
30 Pause
31 Blow-dry function
32 Displays the suction strength
Warning! Hygiene is the top priority
when handling breast milk and all
parts which come into contact with
it. You should therefore only use
a
pump
sterilised.
Before using the breast pump,
always
thoroughly.
The following parts come into contact with
your breast milk and must be immediately
cleaned and sterilised after every use
"5.1 Cleaning (Figure A in reverse
(see
order)"
on page 29 and
page 30):
10 Breast shield
11 Silicone cushion
12 Lip valve
13 Breast milk container
16 Feeding teat
17 Screw ring
18 Protective cap
19 Sealing disc
The following parts must never be cleaned
and sterilised with water:
3
Pump unit
14 Mains adapter
15 USB cable

5 Cleaning and Sterilising

that
is
clean
wash
your
"5.2 Sterilising"
Nature Sense model display (LCD)
The symbols are displayed when the
appropriate function is active.
33 Displays the suction rhythm
34 Memory function
Flashing: current pumping session is
being saved
Constant: saved pumping session is
running
35 Displays the expression time
36 Blow-dry function
37 Displays the charge state of the
rechargeable battery
38 Error message
39 Displays the suction strength
5.1 Cleaning
and
Caution! To avoid damage, carefully clean
the lip valve 12. To sterilise the lip valve, we
hands
recommend just rinsing and boiling for
5 minutes. Cleaning implements may lead to
damage.
1. Dismantle the device as shown in figure B,
proceeding in reverse from 7 to 1.
on
2. Clean the following parts
with warm water and a
little washing-up liquid (or
NUK Rinsing Agent).
Then rinse the parts in
running water:
10 Breast shield
11 Silicone cushion
12 Lip valve
13 Breast milk container
16 Feeding teat
17 Screw ring
29
(Figure A in reverse order)
Warning! To avoid the risk of elec-
tric shock:
Unplug mains adapter 14 from the
wall socket before cleaning.
Warning! Never submerge the pump
unit 3, the mains adapter 14, or the
USB cable 15 in water, as this will
damage the electrical contacts.
!

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido