Troubleshooting - NUK BP7 Instrucciones De Operación

container of defrosted breast milk in the
baby food warmer.
The container must be open to
Caution!
prevent pressure build-up as the milk
warms up.
2. Shake the milk gently before feeding so
that milk and milk fat are properly mixed
again.
3. If you express breast milk more than
once within a period of 24 hours, the
freshly expressed milk may be added to
the previously cooled breast milk.
Problem
Pump does not
work

12 Troubleshooting

Reason
No power supply
Lip valve missing, incorrectly
positioned or damaged
Breast milk container is full and
lip valve is already touching the
expressed milk
No suction or suction level too
low
Filter is wet
However freshly expressed milk must be
cooled down before being added to milk
that is already cool. The temperatures
must be the same (cold on cold).
Notes:
• Consult your health visitor, midwife,
doctor or
information about long-term storage.
• You can find more information about
breastfeeding on our NUK
(www.nuk.com).
Battery operation: Check that the battery
is adequately charged (see
operation (Nature Sense model only)"
page 32).
For mains operation: check that the
mains plug and mains adapter are
correctly inserted
When using a USB power source: Check
whether this can deliver at least
2 amperes of current.
Check that the lip valve is correctly
positioned
If it is damaged, use the replacement lip
valve supplied
Replace breast milk container
Check that the lip valve is correctly fitted.
Make sure that the breast shield forms a
complete seal around your breast.
Remove filter and allow more time to dry
or use dry replacement filter (see
"5.3 Special cleaning of tube and filter"
on page 30).
37
pharmacist for
Remedy
"7.3 Battery
detailed
website
on