HURAKAN HKN-MС6 Manual De Instrucciones página 12

EN
1. Case
2. Screw M5
3. Spring
4. Pusher
5. M6 pusher adjusting screw
6. Blade holder
7. Grinding adjuster
8. Grinding adjuster screw
9. Bean hopper
10. Bean hopper cover
11. Fuse
12. ON/OFF button
13. Motor
14. Silicon ring
15. Lower plate
16. Spare fuses
17. Lower plate fastening screws, M3
18. Legs
19. Ground coffee chute (only for HKN-MC6 model)
20. Chute cover (only for HKN-MC6 model)
21. M4 screws
22. Toothed disc
23. Microswitch holder
24. Microswitch
25. Holder bracket (only for HKN-M6 model)
PRIOR TO FIRST START
1. Unpack the equipment, remove all the packaging materials.
2. Check the equipment for any external damage.
SWITCHING THE EQUIPMENT ON
1. Install the coffee grinder on a stable horizontal surface. The surface shall be dry, clean
and able to withstand the equipment weight.
2. Turn on the power (put the male connector into the female socket).
3. Open the cover, put the ingredients into the grinder tank and close the cover tightly.
4. Press the ON/OFF button [12].
OPERATION
1. Adjust the grinding adjuster [7]. Number [9] means the maximal grinding and num-
ber [1] means minimal grinding.
2. Tighten the grinding adjuster screw [8]. To change the grinding fineness, loose the
screw and readjust the adjuster.
3. Load coffee beans into the hopper [9].
4. Close the hopper cover [10] and put the ground coffee chute [19] onto the base [1]
(only for HKN-MC6 model). In case you use the coffee grinder HKN-M6, put the
12