Maintenance And Care - HURAKAN HKN-MС6 Manual De Instrucciones

holder in the bracket [25] and slightly push the microswitch [24] — the coffee
grinder shall start grinding coffee beans.
EQUIPMENT SHUTDOWN
1. Press the ON/OFF button [12].
2. Unplug the power cable.

MAINTENANCE AND CARE

Turn off the power before any maintenance.
Do not clean the equipment using any abrasive materials, metallic sponges and brushes,
pricking and cutting items, aggressive chlorine-containing cleaning agents, gasoline, acids, al-
kalies and solvents.
Do not wash detachable equipment assemblies in a dishwasher.
SAFETY
1. Equipment shall be installed and connected to the power mains by skilled professionals
only.
2. Use a three-wire circuit with grounding to connect mono-phase equipment.
3. The equipment shall be installed on a flat horizontal surface. The surface shall be dry and
clean.
4. The equipment shall not be used for any purposes other than intended.
5. During operation, the coffee grinder cover shall be closed.
6. The energized equipment shall not be left unattended.
7. Maintenance of energized equipment is prohibited.
8. The motor unit may not be washed under a direct water jet or immersed into water or
any other liquid.
9. In case of any failure, service professionals shall be contacted.
EN
13