Premium PFR50801M Manual De Instrucciones página 17

Temperature inside the
freezer is too warm.
Temperature inside the
freezer is too cold.
Temperature of
external freezer
surface is warm.
Popping or cracking
sound when
compressor comes on.
Bubbling or gurgling
sound, like water
boiling.
Vibrations.
The freezer has recently been disconnected for a period
of time. Four hours are required for the freezer to cool
down completely.
Temperature control is set too warm. Turn the control to
a cooler setting and allow several hours for the
temperature to stabilize.
Door is kept open too long or is opened too frequently.
Warm air enters the freezer every time the door is
opened. Open the door less often.
The door is not closed completely. The door gasket
does not seal properly.
A large amount of warm or hot food might have been
stored recently.
Wait until the freezer has had a chance to reach its
selected temperature.
The freezer has recently been disconnected for a period
of time. Four hours are required for the freezer to cool
down completely
Temperature control is set too cold. Turn the control to a
warmer setting and allow several hours for the
temperature to stabilize.
Fast Freeze switch is turned on. This causes
continuous running of the compressor and bypasses the
temperature control.
The exterior freezer walls can be as much as 30
warmer than room temperature. This is normal while the
compressor works to transfer heat from inside the
freezer cabinet.
Metal parts undergo expansion and contraction, as in
hot water pipes. This is normal. Sound will level off or
disappear as freezer continues to run.
Refrigerant (used to cool freezer) is circulating
throughout the system. This is normal.
Check to assure that the freezer is on a level surface.
15
ο
F