Technical Specifications; General Safety Instructions; Special Safety Instructions - Berner 769355 Instrucciones De Manejo/Instrucciones De Seguridad

Stroke [mm]:
Distance support rollers min./max. [mm]: 340/620
Length of extensions [mm]:
This manual is and must be included in the delivery of the device and when it is sold. The owner and/or user of the device must be
familiar with the operating instructions before the device is started. The manufacturer is not liable for any personal injury and property
damage that is caused by incorrect or improper use of the product.
The machine is delivered assembled in a box
Rules for accident prevention by law, as well as other generally approved rules for safety, occupational medicine and rules for accident
prevention for power-operated work equipment must be observed. Any kind of use beyond this range is considered non-compliance
with regulations. The manufacturer is not liable for any damages resulting thereof. The operating instructions are an integral part of
the delivery and must be handed over to the new owner when the product is resold. To ensure safe operation of the product, it is to be
operated, maintained or repaired only by properly trained personnel. Qualified personnel are persons who have the training, experience
and briefing as well as knowledge of relevant standards, regulations, rules for accident prevention, and are thus qualified to perform the
activitites required at the time, and to detect and avoid possible danger by doing so. The operator must ensure that the persons assigned
for operation, care, and maintenance have read and understood the operating instructions, and observe all the points therein, in order to:
• avert danger to life and limb of the user and third parties,
• ensure operational reliability of the car jack,
• eliminate downtime and harmful effects on the environment caused by incorrect handling.
Responsibilities for work must be clearly defined and observed to avoid unclear authorities in view of safety.
Maintenance on mechanical parts is to be done in intervals and to the extent as prescribed. After maintenance, all disassembled protec-
tive devices must be reassembled in a professional manner. The protective equipment and their protective effect must be inspected by a
technical expert before operation of the device. Disassembling, stopping and/or the bridging of separate protective equipment (covers,
protective enclosures, etc.) and/or safety protective devices (watchdog switch, overload valve, etc.) may cause severe physical or material
damages, and is therefore strictly prohibited by the manufacturer!! The manufacturer warrants the car jacks on the basis of the sales and
delivery conditions. The warranty becomes invalid, when:
• damages are caused by improper operation,
• repair or procedures are carried out by persons not authorized to do so,
• accessories and spare parts are used which do not match the car jacks.
Malfunctions must be reported immediately after detection. The product must be labeled accordingly. Defects must be repaired immedi-
ately in order to reduce extent of damage, and to prevent interference with the safety of the device. If this is not complied with, warranty
will become invalid.
The products are manufactured according to state-of-the-art technology and are delivered safe for operation. Due to the method of
operation, there are locations and parts which cannot be covered or protected without significantly compromising functionality and
operability. Therefore, the operator must exercise a good, personal level of safety to protect himself and the device against damages. The
products may only be used and operated in the context of the conditions defined in the service level agreement and the delivery contract.
It is prohibited to refit, alter, or modify the devices without consultation with the manufacturer. If during operation (remaining) dangers
and risks not described in the manual become apparent, the operator is obliged to inform the manufacturer of them.
The manufacturer is not liable for any personal injuries and property damages, which are caused by improper use of the device. Each
operator is obliged to read these operating instructions before startup of the device.
• It is strictly prohibited to lie below a lifted vehicle!
• Do not overload the jack. Overloading may severely damage the jack.
• For work with the tool, safety shoes must be worn to prevent possible foot injuries.
• During work with the jack, hands must be kept away from moving parts, CRUSHING DANGER.
• Make sure that the fastening bolt (pos.11) is inserted during transport!
• Handling of a load is only permitted on an even and stable ground (danger of tilting).
• The safety valve was adjusted by the manufacturer. It is strictly prohibited to change the adjustment.
• Each jack must be checked at once, when it was overloaded or subjected to a strong impact. It is advisable to have this check done
by qualified personnel.
• NON-COMPLIANCE with these INSTRUCTIONS may cause the lifted load to fall and damage the jack resulting in personal injuries
or property damages.

1. Technical Specifications

19
420
2.Responsibility of the owner and/or use of the device
3.Packaging
4. Safety instructions for use of device

4.1 General safety instructions

4.2 Special safety instructions

6 / 15 - © BERNER
Height of support rollers [mm]:
Diameter of support rollers [mm]:
Frame height [mm]:
115
70
150