• Do not operate any fan with a damaged cord or plug. Discard fan or return it to
an authorized service facility for examination and/or repair.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or
similar coverings. Do not route the cord under furniture or appliances. Arrange
cord away from traffic area and where it will not be tripped over.
• The appliance is not to be used by children or persons with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction.
• Close supervision is necessary when any appliance is used by or near children.
ASSEMBLY
Take off the guard lock nut from motor shaft. Place the rear guard on the front of the
motor housing. Line up the lugs on the front of the motor housing with the holes in the
rear guard (Fig. 2) and make sure the rear grill is completely in the bottom. Screw the
plastic nut tightly to attach rear guard.
Place the fan blade on the motor shaft and secure it by tightening the spinner (Fig. 2)
3