REMOVAL OF GRILL FOR CLEANING
• Be sure your fan is in the "OFF" position.
• Unplug the fan before cleaning.
• Use only a soft damp cloth to gently wipe the fan.
• DO NOT immerse the fan in water and never allow water to enter the Motor
Housing.
• DO NOT use gasoline, paint thinner or other chemicals to clean the fan.
• Remove the screw located in the grill of the fan.
• Unlatch the clips on the grill and remove the front grill carefully.
• Replace by placing the grill back and securing the latch.
• Secure the grill with the screw.
CLEANING & MAINTENANCE
To clean grill: Remove grill (see Removal of Grill for cleaning section) and dust, and
wipe with a damp cloth.
To clean blade: Wipe with a damp cloth. If your Fan is used in a greasy environment,
mild soap may be necessary. Do not use solvents.
To clean base: Wipe with a damp cloth.
STORAGE INSTRUCTIONS
The product must be packaged in its original box for storage.
Place the fan in a storage room with low humidity.
NOTE: If you experience a problem, please return the fan to the place of the original
purchase or see your warranty. Do not attempt to open the motor housing yourself;
doing so may void your warranty and cause damage to the fan or personal injury.
5