Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OBJ_BUCH-1829-002.book Page 18 Friday, October 9, 2015 12:03 PM
Intended Use
In conjunction with a dust-category M vacuum
cleaner and with firm support of the cutting guide,
the machine is intended to cut or slot mainly miner-
al materials such as reinforced concrete, brickwork
and road surfaces without the use of water.
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Handle (insulated gripping surface)
2 Release lock
3 Release button for the cutting unit
4 Cutting-depth scale
5 Button for depth stop adjustment
6 Depth stop
7 Chaser rollers
8 Working-direction arrow
9 Spindle lock button
10 On/Off switch
11 Service indicator
12 Vacuum hose*
13 Vacuum connection
14 Grinder spindle
15 Mounting flange
16 Diamond cutting disc*
17 Spacer discs
18 Clamping nut
19 Two-pin spanner for clamping nut*
20 Break-out tool*
* The accessories illustrated or described are not in-
cluded as standard delivery.
Technical Data
Wall Chaser
Art. No.
Rated power input
Output power
No-load speed
Max. diameter for diamond
cutting discs
Working with one diamond
cutting disc
– Cutting discs width, min.
– Cutting discs width, max.
Working with two diamond
cutting discs
– Cutting discs width, min.
– Cutting discs width, max.
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific coun-
tries, these values can vary.
18 | English
Wall Chaser
Mounting bore
Slot depth
Slot width
Weight according to
EPTA-Procedure 01:2014
Protection class
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific coun-
tries, these values can vary.
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-22 (lime-sand brick).
Typically the A-weighted noise levels of the product
are: Sound pressure level 102 dB(A); Sound power
level 113 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
certainty K determined according to
EN 60745-2-22:
a
=4,0 m/s
h
The vibration level given in this information sheet
has been measured in accordance with a standard-
ised test given in EN 60745 and may be used to
compare one tool with another. It may be used for
a preliminary assessment of exposure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with different
accessories or insertion tools or is poorly main-
tained, the vibration emission may differ. This may
significantly increase the exposure level over the
total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the
tool is switched off or when it is running but not ac-
tually doing the job. This may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the
BWC 35
operator from the effects of vibration such as:
017782
maintain the tool and the accessories, keep the
W
1400
hands warm, organisation of work patterns.
W
750
-1
min
9300
Declaration of Conformity
mm
150
We declare under our sole responsibility that the
product described under "Technical Data" is in
conformity with all relevant provisions of the
mm
2.0
directives 2011/65/EU, until 19 April 2016:
mm
2.4
2004/108/EC, from 20 April 2016 on:
2014/30/EU, 2006/42/EC including their amend-
ments and complies with the following standards:
mm
2 x 2.0
EN 60745-1, EN 60745-2-22.
mm
2 x 2.4
mm
mm
mm
kg
(triax vector sum) and un-
h
2
2
, K=1,5 m/s
.
1 609 92A 1D0 • 9.10.15
BWC 35
22.2
0 – 35
7 – 39
4.7
/II
Publicidad
Tabla de contenido
