Eldom perfect fry MFC 100 Manual De Instrucciones página 13

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 44
CLEANING AND MAINTENANCE
- Before cleaning, turn of the appliance with the button (E), disconnect from the power supply and wait to cool
down.
- Pointed or sharp objects must not be used to clean the appliance, as it may result in damaging the functional
parts or breaking the safety measures of the appliance.
- All moving parts should be washed with warm water with liquid. Best wash them right after use. After rinsing
with clean water, dry them up immediately.
- Never immerse the body (12) in water or rinse it under current water. Clean the body (12) and the interior of the
appliance with a damp cloth.
- If washing the drawer (4) and the basket (1) is difficult, some hot water with washing detergent may be poured
into the drawer (4), after which place the basket (1) and leave the appliance form several minutes.
ENVIRONMENT PROTECTION
- The device is made of materials which can be reused or recycled.
- The device should be handled to a special point which deals with collecting and recycling of electric and
electronic equipment.
GUARANTEE
- The device is designed to be used in households.
- Not for professional use.
- The control lamp is not subject to guarantee.
- The guarantee expires when device is used improperly. Detailed warranty description in the annex.
TROUBLESHOOTING
In case of any problems with the appliance, check the following table:
PROBLEM
The appliance is not running.
Products are not sufficiently roasted.
Products are not roasted uniformly.
The drawer cannot be inserted into the
appliance.
White smoke escapes from the appliance.
POSSIBLE CAUSE
1. The appliance is not
connected to the power supply.
2. The appliance is not turned
on
1. The basket is overfilled.
2. The temperature is set too
low.
3. The operation time is set too
short.
Some products should be
turned during roasting.
The basket is overfilled.
1. The roasted products have
too much of oil or too much oil
was added.
2. There are remains of fat in the
drawer or in the basket.
CAUSE SOLUTION
1. Connect the appliance to
the mains.
2. Started the appliance with
the button "F".
1. Remove some products
from the basket: see Table 1.
2. Increase the temperature.
3. Increase the operating time.
During roasting, turn the products
or shake the basket.
Remove some products from
the basket: see Table 1.
1. It is normal and does not
affect the products and
does not pose danger to the
appliance.
2. Clean the drawer and the
basket.
EN
13

Publicidad

Tabla de contenido
loading

Tabla de contenido