Power Supply - Eldom trimmy MT11 Manual De Instrucciones

A
B
C
D
F
E
G
H
The trimmer is designed for trimming
nose and ear hair.

POWER SUPPLY

The device is powered by one AA alkaline bat-
tery – not included.
How to install the battery:
• turn the device off by setting the switch (F) to
"OFF"
• rotate the cover (H) counter-clockwise and
remove it
• insert the battery – pay attention to the ori-
entation – Fot. 1.
• place the cover (G) as shown - Fig. 2 and turn
clockwise to lock it in place.
fot.1
fot.3
fot.2
A Cutting head cover
B Cutting head
C Blade chamber
D Blade
E Beard trimmer
F Switch
G Body
H Battery cover
Dispose of used batteries in the dedicated
containers.
TRIMMING
• remove the cover (A)
• turn the device on by setting the switch (F) to
"ON"
• carefully put the cutting head (B)
in the nose or ear and cut the hair.
OR attach the tip (E) and trim the beard
• when the trimming is done, turn the device
off by setting the switch (F) to "OFF" and place
the cover (A)
INSTRUCTIONS FOR USE
TRIMMER MT11
fot.4
power supply: AA battery, 1 pc.
EN
7