Fluke Networks MicroScanner Serie Guía De Funcionamiento Básico página 6

WSafety Information
 Do not use and disable the Product if it is
damaged.
 Do not use the Product if it operates
incorrectly.
 Batteries contain hazardous chemicals that
can cause burns or explode. If exposure to
chemicals occurs, clean with water and get
medical aid.
 Remove the batteries if the Product is not
used for an extended period of time, or if
stored in temperatures above 50 °C. If the
batteries are not removed, battery leakage
can damage the Product.
 The battery door must be closed and locked
before you operate the Product.
 Repair the Product before use if the battery
leaks.
 Replace the batteries when the low battery
indicator shows to prevent incorrect
measurements.
 Turn off the Product and disconnect all test
leads, patch cords, and cables before you
replace the battery.
 Be sure that the battery polarity is correct to
prevent battery leakage.
 Do not disassemble or crush battery cells
and battery packs.
 Do not operate the Product with covers
removed or the case open. Hazardous
voltage exposure is possible.
 Remove the input signals before you clean
the Product.
4