Keyboard Lock; Silence" Function; Abnormal Operating Conditions - Jacuzzi SKYLOUNGE Uso-Mantenimiento

Press the key "Up/Down"
rently memorized temperature, the respective symbol appears
and the LED comes on.
Press the key "Up/Down"
value from a minimum of 15 °C to a maximum of 40 °C (59÷104
°F).
NOTE: Press and hold the button down until you reach the desired
value; by releasing the button and pressing it again, the adjustment
is made in the opposite direction.
To show the temperature of the water in the tub again, do
not touch any key for about 5 seconds.
Maintenance of minimum temperature of water in tub and
anti-freeze protection of the pipes ("Smart Winter").
The system software of your hot tub is designed to provide ef-
ficient, rational management of any hazardous situations which
may occur due to excessively cold temperatures and freezing of the
water.
For further information on water heating and system safe-
guards, refer to the product's installation manual.
NOTE: when the anti-freeze protection is active, the display will
show the message ICE.

Keyboard lock

To avoid accidentally modifying the set parameters, there is an op-
tion to activate the keyboard lock function.
To enable this function, simply press the keys below at the
same time and hold for approximately 3-5 seconds:
The message "Loc" appears (followed by the water temperature).
: the display will show the cur-
again to change the displayed
NOTES
- The "keyboard lock" function cannot be activated on
round displays.
- When the display is locked, the pumps, spotlight, etc. cannot be
activated; however, the round displays can be used for activating
the various functions.
To disable the keyboard lock, simply press these same keys
at the same time for approximately 3-5 seconds (the water tem-
perature is displayed).

"Silence" function

This function prevents the automatic start of the pumps (filtering
cycle) and/or the blower; It can therefore help to reduce the noise
present in the environment (e.g. during the night).
The time can be used to program the periods in which the
automatic operation of the pumps and/or the blower is to be
turned off (also refer to the documents that come with the tim-
er).
HOWEVER, it is possible to turn the hydromassage, blower
and/or spotlight on (in these cases, the "silence" function is sus-
pended and resumes about one minute after the hydromassage,
blower and/or spotlight turns off).
During the function, "Sby" appears on the screen.
Refer to the hot tub installation manual for details regard-
ing operation.

Abnormal operating conditions -

Messages and alarms on the display
Messages or alarms are indicated on the display with the corre-
sponding error code.
You will continue to see the code if the alarm condition persists.
Please refer to the hot tub installation manual for informa-
tion regarding alarm messages.
19
~ 3-5"