Radio Operation - auna US-10032056 Manual Del Usuario

2. When the AC power cord (included) is connected to the AC Power
Socket on the back of the unit and the other end is plugged into a
120V AC~ 60Hz wall outlet, the unit will discontinue battery operation
automatically, and operate on AC Power only.
3. Slide the FUNCTION SWITCH to "CD/USB" for CD or USB play, "FM" for
FM radio, "BT/AUX" for BT or AUX play and "OFF" to turn off the unit.

RADIO OPERATION

1. Slide the FUNCTION SWITCH to "FM ST." as desired.
2. Rotate the TUNING CONTROL KNOB to your desired radio station
according to the DIAL SCALE on the knob.
3. Rotate the VOLUME CONTROL KNOB to adjust to the desired output
level.
4. To turn off the radio, slide the FUNCTION SWITCH to "OFF" position.
TIPS FOR BEST RECEPTION
FM – If a stereo broadcast program is being received, during FM or
FM Stereo reception, always keep the FM TELESCOPIC ANTENNA fully
extended for best performance. However, if FM reception is weak, try
repositioning the unit near an open window until you get the best reception.
To AC in jack
AC power cord (supplied)
To a wall outlet
EN
13