Technical Data; Battery Replacement - Eldom dima WK200S Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24

TECHNICAL DATA

- weight capacity: 5kg
- weight resolution: 1g
- accuracy of measurement: 15g
- power: 2xAAA.
Batteries do not pose the equipment.

BATTERY REPLACEMENT:

1. Open the battery case cover at the bottom of scale.
2. Take out the used battery.
3. Install new baterry by putting one side of the battery bebeath the battery baffle and
then pressing down the other side. Used batteries should be thrown away the containers
specially designed for this purpose.
HOW TO USE
1. Please put the scale on a hard and flat surface.
2. Place bowl (if used) on the scale before turning on the unit.
3. Press and release [ON/OFF] button to turn on the unit.
4. Wait until LCD shows all information.
5. Load weighing object on to start weighing, LCD will show the weight reading.
CHANGES OF MEASUREMENT UNITS:
In order to change measurement units from g to poungs, after switching on the scales,
the button [UNIT] should be pressed. Another pushing the [UNIT] button will cause the
repeated change of the units.
THERMOMETER
The scale is fitted with a thermometer that reads the ambient temperature in the range
from 0 ~ +40°C with 2°C tolerance.
STOPWATCH
To facilitate counting out (e.g. baking time), the scale is fitted with a stopwatch. To start
the stopwatch, press the button "T-SET" and set the required time with the buttons "u"
and "t".The start the stopwatch, press the button "T-SET" again. Counting out may be
stopped by pressing the button "T-SET". When the counting out is ended, the alarm will
be triggered for about 30 seconds. The alarm may be turned off at any time with the button
"ON/OFF".
INSTRUCTION MANUAL
ELECTRONIC KITCHEN SCALE WK200S
EN
EN
7

Publicidad

Tabla de contenido
loading

Tabla de contenido