Descargar Imprimir esta página

Care, Maintenance & Troubleshooting Guide - SPORTSTECH F10 Manual De Instrucciones

Ocultar thumbs Ver también para F10:

Publicidad

7. CARE, MAINTENANCE & TROUBLESHOOTING GUIDE
WARNING: To prevent electrical shock, please turn off and unplug the treadmill before cleaning or performing routine
maintenance.
WARNING: Always check the wear and tear components like spring knob and running belt to prevent injury.
CLEANING
After each exercise, ensure that the unit is wiped down and any sweat is removed from the unit. The treadmill can
be cleaned with a soft cloth and mild detergent. Do not use abrasives or solvents. Be careful not to get excessive
moisture on the display panel as this might damage the unit and create an electrical hazard. Please keep the treadmill,
especially the computer console, out of direct sunlight to prevent damage to the screen.
STORAGE
Store the treadmill in a clean and dry indoor environment. Never leave or use the unit outdoors. Ensure the master
power switch is off and the power cord is un-plugged from wall outlet.
TROUBLESHOOTING GUIDE
Problem
Treadmill will not
1. Treadmill not plugged in.
2. Safety Tether Key is not correctly installed.
3. Circuit breaker in the house has been
tripped.
4. Treadmill circuit breaker has been tripped.
Belt slips.
Belt not tight enough.
Belt hesitates when
1. Not enough lubrication applied onto the
stepped on.
running deck.
2. Belt is too tight.
Belt is not centred. Running belt tension not even
across the rear roller.
Potential Causes
39
Corrections
1. Plug the power cord into a wall outlet.
2. Reinstall the Safety Tether Key.
3. Reset the circuit breaker, or call an electrici-
an to replace the circuit breaker.
4. Wait 5 minutes and then try to restart the
treadmill.
Adjust belt tension.
1. Apply lubricant.
2. Adjust belt tension.
Centre the belt.

Publicidad

Capítulos

loading