Specifications; Handpiece; Transfer Shield - Stryker SYSTEM G 7306-001-000 Instrucciones De Uso

7306-001-700 Rev-A

Specifications

Handpiece

Model:
Catalog Number:
Dimensions:
Length:
Width:
Height:
Mass:
Nominal Speed:
Excursion:
Mode of Operation:
Duty Cycle:
Rest Between Cycles:
Applied Part:
Maximum Temperature
of Applied Part:
Power Supply:
Ingress Protection (IP):
Equipment Type:
European Conformity:

Transfer Shield

Model:
Catalog Number:
Dimensions:
Length:
Width:
Height:
Mass:
European Conformity:
www.stryker.com
STRYKER SYSTEM G
Reciprocating Saw
7306-001-000
212.10 mm
83.82 mm
228.40 mm
1.08 kg
11500 cycles per minute
3.9 mm
Non-continuous
1 minute on/4 minutes off, 5 times
3 hours
The handpiece and cutting tool as defined by the manufacturer
Less than 43 °C, as tested to the Product Safety Compliance standards at a maximum ambient
temperature of 30 °C.
Internally Powered
IPX0
Type BF Applied Part
STRYKER SYSTEM G Transfer Shield
7304-120-000
150.9 mm
103.5 mm
37.0 mm
77 g
EN
9