Eldom RAPIDBLADE MT500 Manual De Instrucciones página 13

2
6
10
USE
Shaving
- Use the switch (2) to activate the device.
- Place the blade against the skin and slide it with long strokes, pressing lightly as you go (Fig. 2).
- Note. The surface of the blade should rest flat on the skin (Fig.3).
- Both blade edges can be used for the desired effect (Figs. 4, 5 and 6).
- After you finish shaving, use the button (2) to switch off the device and clean it.
Trimming your hair with the comb
- The device is equipped with a precision comb (4) which allows you to trim your hair to diffe-
rent lengths.
- When trimming for the first time, start with the maximum length setting,
- The settings on the control wheel correspond to the length of the hair (in millimetres) left
after trimming.
- Choose between a length of 0.5 mm and a length of 10 mm.
- Mount the comb (4) on the blade (Fig. 7).
- Enable the device with the switch (2).
3
7
11 12
4
8
EN 13
5
9