Beper 40.120 Manual De Instrucciones página 12

Arm blood pressure monitor Use Instructions
Product description Fig. A
1. Inlet for air tube
2. WHO (World Health Organisation) blood pressure classification indicator
3. Display
4. Systolic blood pressure
5. Diastolic blood pressure
6. Pulse rate
7. Mode button
8. On/ Off switch button
9. Set button
10. Battery compartment
11. Arm cuff
Display description Fig. B
1. Groups
2. Low batteries indicator
3. WHO (World Health Organisation) blood pressure classification indicator
4. Average of last 3 readings
5. Irregular pulse indicator
6. Time
7. Date
8. Pulse rate
9. Diastolic blood pressure
10. Systolic blood pressure
Some important guidelines
Avoid eating, exercising, and bathing for 30 minutes prior to testing.
Sit in a calm environment for at least 5 minutes prior to testing.
Do not stand while testing.
During the testing, sit in a relaxed position while keeping your wrist level with your heart.
Avoid speaking or moving body parts while testing.
Wait 3 minutes or longer before re-testing.
It is suggested to measure your blood pressure at the same time, on same wrist, in the same position,
and possibly in the same position.
This blood pressure monitor is not recommended for people with severe arrhythmia.
Batteries installation Fig. A10
Slide off battery cover as indicated by the arrow, install 4 AAA batteries according to polarity, close
battery cover.
System Settings
With power off, press "SET" button to activate System Settings. The memory group icon flashes.
Select memory group
In the system setting, you may accumulate test results into 2 different groups. This allows multiple
users to save individual test results (up to 60 memories per group.) Press " MODE " button to choose
a group. The results of the tests will automatically save in each selected group.
12