Residual Risks; Emergency Procedure - Gude 1200/12 V Traducción De Instrucciones Originales

ENGLISH
12

Residual risks

Even when the device is used properly and all safety
regulations are complied with, there still may be
some residual risks.

Emergency procedure

Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. If you seek help, state the
following pieces of information: 1. Accident site, 2.
Accident type, 3. Number of injured persons, 4. Injury
type(s)
Symbols
WARNING / Caution!
Keep bystanders out the dangerous area
(5 m).
Entanglement hazard
Read the operating instructions to reduce
the risk of injury.
Wear eye protective goggles !
Wear safety shoes with steel reinforce-
ment!
Wear gloves!
Keep your hands in safe distance.
Keep dry at all times. Never expose tool
to rain.
Forbidden operation for persons with
long hair.
CE marking
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
Class III tool.
Safety Warnings Electric cable winch
Do not use the winch to lift loads! The winch must
only be used for pulling loads, e.g. for recovering
vehicles or for pulling/lowering boats onto trailers.
Do not overload the winch!
Before using the winch, check that the cable is in a
good condition and ensure that the lifting accessories
used to secure the load are approved for the load and
in perfect condition.
Do not move loads that could roll or fall over by them-
selves. If necessary, take action to avoid this.
Keep children and bystanders away while operating
a power tool.
People or animals must not be transported.
Wear suitable protective clothing such as sturdy
shoes with non-slip sole, robust long trousers, gloves,
safety glasses and hearing protection!
Do not wear loose clothing or jewels. Hear, clothing
and gloves must be out of reach of moving parts
as they could get caught by the rotating parts. Do
not use the appliance when barefooted or in open
sandals.
Do not overreach. Keep proper footing and balance
at all times.
Do not use the appliance in bad weather, especially
when there is a risk of storm.
Provide adequate lighting or good lighting conditions
when working with the machine.