CLEANING AND STORAGE
The heater should be cleaning twice for a year. Turn thermostat off and remove plug
from electrical outlet and make sure that the heating element of the heater is cool
before cleaning heater. Use a soft cloth for dusting. For cleaning, use only a damp rag
and non-abrasive dish detergent. Do not use abrasive chemical cleaners as these
may harm the finish. If heater is used in very dusty location, use a vacuum cleaner
dust brush to remove dust and other foreign material from the grilles. Always unplug
cord and wrap around heater handle when not in use. Move heater to a safe location
for storage.
SERVICE
This heater does not require any routine maintenance other than occasional cleaning
to prevent clogging of intake grille opening. To clean air intake grille, use vacuum with
brush attachment or high pressure air. The motor is permanently lubricated. Do not
operate the heater with a damaged cord or plug or if the heater malfunctions or has
been damaged in any manner. Any other servicing should be performed by qualified
service personnel. Return heater to authorized service facility for examination,
electrical, or mechanical adjustment, or repair.
OPERATION OF THE SAFETY THERMAL LIMIT CONTROL INDICATES THE HEATER HAS BEEN
SUBJECTED TO SOME ABNORMAL CONDITIONS. IT IS RECOMMENDED THAT THE HEATER BE
CHECKED BY A REPUTABLE ELECTRICIAN OR REPAIR SERVICE TO INSURE THE HEATER HAS
NOT BEEN DAMAGED.
Part
Description
1
Main support
2
Main support plate
3
Wall mount panel
4
Heater
5
Air panel assy
6
Heater clasp panel
7
Front mesh
8
Shell
9
Front mesh support
10
Thermostat
11
Leg
12
Bottom panel
13
Supply cord
14
Knob
15
Temperature Switches
16
Back mesh support
17
Back mesh
18
Motor
19
Motor support
20
Wind leaves
MAINTENANCE
WARNING
REPLACEMENT PARTS
EG4800DG
EH4800DG001
EH4800DG002
EH4800DG003
EH4800DG004
EH4800DG005
EH4800DG006
EH4800DG007
EH4800DG008
EH4800DG009
EH4800DG010
EH4800DG011
EH4800DG012
EH4800DG013
EH4800DG014
EH4800DG015
EH4800DG016
EH4800DG017
EH4800DG018
EH4800DG019
EH4800DG020
5