Samsung VAC-9073R Instrucciones De Operación página 8

3. Replacing the Brushroller Belt
Use with caution when replacing the belt that drives the brushroller. Tension on the belt is high.
1) Remove the brush cover. Grasp the
brushroller firmly, and pull it out.
3) Reinsert the brushroller, making sure that both
ends of the brushroller are fitted into the grooves
of the nozzle head.
4. Cleaning the Brushroller
1) Turn off the vacuum cleaner and unplug the
power cord.
2) Remove the cover to expose the brushroller.
3) Cut off any lint, carpet pile or hair that has
accumulated around the brushroller with a pair
of scissors. Replace the brush cover.
2) Remove the flat belt from the motor shaft and the
brushroller. Loop the new belt around the motor
shaft and then loop it around the brushroller.
4) Be sure that the belt is not twisted. Rotate the belt
3 or 4 times to position it correctly on the roller and
to make sure all rotating parts move smoothly.
Replace the brush cover.
-7
EN