Swing-N-Slide NE 5007 Instrucciones De Ensamblaje página 8

PROJECT 615
Climbing Rock
Fig. 3
(2) 2" Hex Head
Climbing Rock Installation
1. Mark locations of Climbing Rocks on the Climbing Wall in a pattern that
will easily allow your child to climb to the deck. Make sure the bolt hole
locations are clear of wall supports before drilling.
2. Drill holes through the wall at the desired locations using a 3/8" drill bit.
Install Climbing Rocks as shown in (Fig. 3).
3. Make sure the Climbing Wall and Climbing Rock connections are secure
before allowing any children to play on the Climbing Wall.
Bolts
(1) Loc Washer per bolt
(1) Flat Washer per bolt
(2) "T" nuts
3/8" Holes
Hold (rock)
8