Swing-N-Slide NE 5007 Instrucciones De Ensamblaje página 9

2-1/2" screw
Slide Barrier Construction
1. Carefully remove your Barrier Support Board and
(6) Barrier Boards from the back barrier to place
your slide, as shown in (Fig. 4).
Retain this lumber and fasteners as you will need
them in the next step.
Note: Make certain you will have a clear 72"
Safety Zone from the exit of your slide.
Reference your Turbo Tube Slide Plan for further
information.
2. Reattach your Barrier Support Board and Barrier
Boards, making certain they are evenly spaced,
as shown in (Fig. 4a).
Fig. 4a
2-7/8" Gap
Between Each
Barrier Board
4-1/2"
2-1/2"
screws
per joint
9
PROJECT 615
Fig. 4
(4)
2-1/2"
screws
per barrier
board
(3)