Replacing The Batteries; Cleaning And Maintenance - Lanaform Stand Mirror Manual De Instrucciones

Thank you for your interest in the LANAFORM® "Stand Mirror X10" tactile mirror on a stand.
This X10 mirror with LED lighting will find a special place in your home.
EN
PLEASE READ ALL THE INSTRUCTIONS BEFORE USING YOUR MIRROR, ESPECIALLY THIS BASIC SAFETY
INFORMATION:
- Use this device only according to the instructions for use given in this manual.
- This device is not intended for use by people (including children) with reduced physical, sensory or mental capabilities,
or persons with lack of experience or knowledge, unless a person responsible for their safety can supervise or instruct
them beforehand on how to use the device. Children should be supervised to ensure that they do not play with the device.
- Do not use accessories that are not recommended by Lanaform® or that are not supplied with this equipment.
- Never let anything drop, and never insert any object, into any openings.
- Never use this device in a room where aerosol products (sprays) are used or in a room where oxygen is being
administered.
- Never immerse the device in water or any other liquid to clean it.
Features
- 2-sided mirror: X10 and X1.
- 360° rotating mirror.
- Mirror with variable intensity LED lighting.
- Tactile mirror.
- To switch on the light, please press the button on the X1 side of the mirror. Keep pressing to increase or dim the
brightness. Press the same button one last time to switch off the light.

Replacing the batteries

1.Place the mirror with the X10 magnifying side facing you. Using both hands, slide the mirror's cover in an anti-clockwise
direction the opposite direction by referring to figure 1.
2.Put down the side of the mirror you have detached and remove the battery compartment cover (figure 2).
3.Replace the used batteries with 4 new AAA (1.5V) batteries and replace the cover (figure 3)
4.Still using both hands, replace the side removed making sure you the tabs are aligned and turn clockwise to mount it
correctly. (figure 4)

Cleaning and maintenance

Remove the batteries before cleaning.
Clean the faces of the mirror using a glass cleaning product and a soft, damp cloth.
Do not immerse the mirror in water.
Never use any other liquid or abrasive cleaner.
Stand Mirror x10
5