Safety Information - Hydor 650/180 Manual Del Usuario

Circulation pump 650/180-1200/300
Dear Hobbyist,
we thank You for choosing Hydor. Please read the following instructions very carefully for best understanding of the characteristics of this new, unique and innovative
product.
Description - Fig. 1/1a -
Upper chamber
A.
Impeller
B.
Pump body + Lower chamber
C.
Spere joint
D.
Internal suction cup+magnet support
E.
External suction cup+magnet support
F.
Attention!!!
Pumps are specially designed for use in aquariums and tanks for water movement. It is not a filtration pump. Please refer to your dealer for any other application.

Safety information

Attention:please verify that all components of the pump are undamaged before putting it into function. Before any kind of intervention, ALWAYS disconnect electrical supply of the pump and
any other appliance placed in the water. Be sure that the voltage of the mains supply corresponds to the voltage shown on the unit' s label.
The pump is intended for indoor use only in fluid with a temperature of max. 35° C (95° F).
•
Do not connect to electrical supply if pump is not completely immersed in water.
•
Do not connect to electrical supply if pump is missing parts.
•
Do not connect to electrical supply if pump is not positioned using the supplied suction-cup + magnet support.
•
The cord of this pump cannot be replaced or repaired; in case of damage the entire unit must be substituted.
•
Do not cut or pull on the electrical cord.
•
Always disconnect from mains gently and make sure hands are dry.
•
English 9