Installation - Powerfix Profi 10385A/ES-P06 Instrucciones De Utilización Y De Seguridad

Important warning about drilling into walls!
Before drilling, ensure there are no gas, water or electrical lines
in the area where you will be drilling. Must be installed by a
competent person. It is essential that you take note of the wall
quality, as the included fittings are not suitable for all types of
wall. Ask the retailer about screws and wall plugs suitable for
the respective wall structure. The manufacturer assumes no lia-
bility for plugs installed incorrectly in the wall and any resulting
damage.

Installation

Before installation, switch off the electrical circuit at the
circuit breaker box or remove the fuse from the fuse box.
Note: The recommended installation height is between
1.8 and 2.5 m.
Note: Before installation, ensure an optimal direction of
motion. The motion detector reacts more sensitively to move-
ment from the side than to motion from the front (see Ill. A).
32 GB/IE
DANGER TO LIFE BY ELECTRIC SHOCK!