Uline H-1548 Instrucciones De Ensamble

H-1548, H-1882, H-2076
π
H-4096, H-4097, H-5566
CONVEX SAFETY MIRROR
Mirror
Metal Channel
NOTE: Bolts, nuts, and washers for parts assembly included. Mounting hardware available separately.
INSTALLING MIRROR ON WALL OR POST
1. Attach offset bracket to wall or post. (See Figure 1)
2. Attach mirror to offset bracket and adjust angle.
3. Tighten screws on ball bracket to fix mirror in desired
position.
4. You may discard the metal channel and base plate.
Figure 1
Figure 3
PAGE 1 OF 3
PARTS INCLUDED
INDOOR
Base Plate
Offset Bracket
BACK VIEW
ASSEMBLY INSTRUCTIONS
Figure 2
1-800-295-5510
uline.com
Mirror
INSTALLING MIRROR ON COUNTER OR CEILING
1. Attach base plate to either counter or ceiling.
(See Figure 2)
2. Attach metal channel to base plate (use nuts, bolts
and washers).
3. Attach offset bracket to other end of channel (use
nuts, bolts and washers).
4. Attach mirror to offset bracket.
5. Tighten screws on ball bracket to fix mirror in desired
position.
INSTALLING MIRROR ON WALL WITH METAL CHANNEL
1. Attach base plate to wall. (See Figure 3)
2. Cut end of metal channel; bend to right angle.
3. Attach metal channel to base plate (use nuts, bolts
and washers).
4. Attach mirror directly to metal channel. Offset bracket
can be discarded.
5. Tighten screws on ball bracket to fix mirror in desired
position.
Para Español, vea página 2.
Pour le français, consulter la page 3.
OUTDOOR
Base Plate x 2
Metal Channel x 2
BACK VIEW
Offset Bracket x 2
0521 IH-1548