First Setting / Time Setting / Setting Of A Second Time Zone - Ulysse Nardin Lady Dual Time Manual Del Usuario

own
ge
FIRST SETTING
When first setting the watch, synchronize the local time
(hands) and the home time display located at 9 o'clock.
Place the hand indicator on position ''H/M'' using the pusher on
the crown. Then set the minute hand to 10 or 15 using the crown.
• If the hour hand and Home Time display show the same
hour, you need to ensure they agree as am or pm, turn the
crown forward, advancing the time until the date changes.
Make sure the Home Time display shows 24. If it shows 12,
advance the hour hand by pressing either pusher 1 (+) or
pusher 2 (–), 12 times.
• If the time displayed by the hour hand differs from the home
time, depress the appropriate pusher until both show the
same time.
TIME SETTING
Place the hand indicator on ''H/M''. The movement is then
locked. To allow an accurate setting, the second hand will
stop (stop seconds function). Make sure the hands are prop-
erly showing either am or pm, otherwise the date will change
at noon instead of midnight. Turn the hands clockwise to the
desired time and replace the hand indicator back on ''Remontage''.
SETTING OF A SECOND TIME ZONE
When the hour hand and Home Time are synchronized, it
is possible to display a second time zone. A second time
zone can be adjusted to any different local time without the
need to remove the watch off the wrist. The hour hand ad-
justs forward or backward by pressing pusher 1 (+) or 2 (-).
5