SELFSAT Snipe Manual Del Usuario página 10

D. Changing the satellite
Function Description
Up / Down button" Light
"OK" Button
E. Back to Home position
Function Description
"HOME" Button
F. GPS LED light
Function Description
"GPS" light
"Satellite
i. If you want to change desired satellite, you can change the
target satellite using the "Up/Down" buttons, then press
the "OK" button to select the new satellite.
i. Whenever you wish to return the antenna back to the Home
position, press and hold the"Home" button for a few seconds.
i. GPS LED confirms the current location from 24 GPS satellites
in the world.
ii. When your SNIPE identifies a GPS signal, GPS LED light will
remain on, regardless if the antenna is pausing or moving.
GPS can help to search for the satellite faster & catch the
optimum satellite signal, and assist SNIPE to acheive the
best elevation & skew angle.
iii. Also, while program updating, the GPS LED light will flash
to show the update procedure is processing. During this
time, GPS LED light on doesn't mean the unit is communi-
cating with GPS satellite.
Operation
Operation
Operation
9