USB FLASH DRIVE MODE
The speaker will play the music from your USB flash drive when plugging the USB into the
USB-A port.
LED
Bluetooth: Bluetooth indicator will flash blue for pairing and is kept on when connection
to the device is successful.
AUX-IN & TF/Micro SD & USB flash drive: Bluetooth indicator flashes blue slowly when
music is playing and stays on when music is paused.
Charging: The red charging indicator is on when the speaker is being charged and goes off
when charging is complete.
TWS: During TWS mode, the yellow indicator will be stay on.
Low battery: The red indicator will flash slowly with a sound prompt every 30 seconds.
RESET
There are two ways to reset the speaker to factory default settings. The first method is to
hold the 'M' button for about 5 seconds to clear all pairing records and restore to factory
default settings. The second way is to hold the Power ON/OFF button for about 8 seconds
to reset the speaker to factory default settings if it malfunctions. After resetting, you need
to connect the speaker to your Bluetooth device manually like the first time you used the
speaker.
AUTO-POWER OFF
The Element T6 Plus speaker will power off automatically after 1 hour to save battery if it
does not pair with any device through Bluetooth or does not play any sound after turning
on. When you need to use it, press the Power ON/OFF button to turn it on. When the
speaker auto-powers off, you need to turn the speaker on again manually if you need to
use the power bank function.
TIPS
Because of the powerful output of this speaker, please do not be too close to the speaker
and keep an appropriate distance when playing music. To avoid any discomfort caused by
excessive sound, it is recommended to listen to music at a suitable volume.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO INSTRUCTIONS.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
CARE & MAINTENANCE
Please keep this manual handy for future reference. To clean the Tronsmart Element T6
Plus Bluetooth Speaker use a lightly dampened cloth in water to clean the exterior in-case
it gets dirty. Do not use any form of detergents or cleaning material to clean the product
as any type of chemical may make this device unusable. Do not disassemble this product.
It contains no user serviceable parts. Do not drop or jump on it and treat it with care for
the best performance. Keep the product in a dry location. Dust, dirt & moisture from
04