Using Your Induction Hob - Cooke & Lewis CLIND60RF Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 92
01

Using your induction hob

1. Touch the On/Off control "C". The hob will beep once and the zones will show "-" to indicate that
standby mode.
NOTE: If you do not select a cooking zone and power level within one minute, the hob will
switch off automatically.
2. Place a pan suitable for induction cooking on a cooking zone; ensure that the base of the pan
and the cooking surface is clean and dry.
3. Choose the zone using (A)
will be displayed.
4. Select the output using the power control (D) from 0-9 and cooking commences. You can modify
this any time during cooking.
POWER DOWN
Heating Zone
• If you don't choose a heat setting within 1 minute, the induction hob will automatically switch off.
You will need to start again at step 1.
• You can modify the heat setting at any time during cooking.
When you have fi nished cooking
1. Select the cooking zone (A).
2. Alter the power output level (D) to zero.
NOTE: The hob will display "H" to show the cooking zone is too hot to touch.
This is due to the convection of heat generated in the pan transferring back to the cooking surface of
the hob during use and is perfectly normal.
and "0" will fl ash. If no power level is selected within 5 seconds, "–"
POWER UP
Normal Power
1500 W
1200 W
1500 W
1200 W
Boost Power
2000 W
1500 W
2000 W
1500 W
35

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

3663602553069

Tabla de contenido