Sony BKM-37H Manual De Instrucciones página 19

3
Connect the supplied connecting cable to the DC 5V/
12V IN and LAN (10/100) connectors on the rear panel
of the control unit.
Note
Be sure to plug the female connector of the cable into
the DC 5V/12V IN connector on the control unit.
Plug the female
connector into
the control unit.
4
Place the rear stay on the right stand and left stand and
assemble using four screws B (4 × 8).
Screw B
Rear stay
5
Remove the four legs from the bottom of the monitor.
Monitor
6
Place the control unit with the stands attached on the
monitor. Attach the stands to the monitor using four
screws D (4 × 12).
Screw D
19
Assembly