Timer On/Off; Wi-Fi; Settings; Setting The Hour Mode - LG SIGNATURE LUTG4519SN Manual Del Proprietário

28 OPERATION

Timer On/Off

The Lower Timer On/Off serves as an extra timer in
the kitchen that beeps when the set time has run out.
It does not start or stop cooking.
The Timer On/Off feature can be used during any of
the oven control functions.
Setting the Timer
1
Press Timer On/Off. 0:00 with HR inside it
appears and Timer flashes in the display.
2
Press plus(+) or minus(-) to select the desired
time. Plus(+) increases the time and minus(-)
decreases the time.
3
Press Timer On/Off or Start to start the Timer.
The remaining time countdown appears in the
display.
4
When the set time runs out, End shows in the
display. The indicator tones sound every
15 seconds until Timer On/Off is pressed.
NOTE
If the remaining time is not in the display, recall
the remaining time by pressing Timer On/Off.
Press Timer On/Off twice to set the time in
minutes and seconds.
Press Timer On/Off once to set the time in
hours and minutes.
Cancelling the Timer
1
Press Timer On/Off once.
The display returns to the time of day.

Wi-Fi

The Wi-Fi button is used to connect the appliance to
a home Wi-Fi network.
1
Press Upper CLEAR/OFF and Lower CLEAR/
OFF.
2
Press and hold Timer On/Off for 3 seconds.
3
The power-on chime sounds, Set appears in the
display, and the Wi-Fi icon (
4
Register the appliance on the Wi-Fi network
using the smart phone app. (See page 40.)
5
To disconnect the appliance from the network,
delete it from the registered appliances in the
app.

Settings

Press and hold Start Time for three seconds.
Then press the Start Time key repeatedly to toggle
through and change oven settings.
The Setting key allows you to:
set the hour mode on the clock (12 or 24 hours)
enable/disable convection auto conversion
adjust the oven temperature
activate/deactivate the preheating alarm light
set the beeper volume
switch the temperature scale between Fahrenheit
and Celsius

Setting the Hour Mode

The control is set to use a 12-hour clock. To reset the
clock to 24-hour mode, follow the steps below.
1
2
3

Setting Convection Auto Conversion

When Conv. Bake and Conv. Roast are selected,
Convection Auto Conversion automatically converts the
standard recipe temperature entered to a convection
temperature by subtracting 25 °F / 14 °C. This
auto-converted temperature shows on the display. For
example, select Conv. Bake, enter 350 °F, and 325 °F
shows on the display after preheat.
Convection Auto Conversion is enabled by default. To
change the setting, follow these instructions.
1
2
3
) blinks.
Press and hold Start Time for three seconds.
Press plus(+) or minus(-) to set the desired
hour mode on the clock.
Press Start to accept the desired change.
Press and hold Start Time for three seconds.
Then press Start Time repeatedly until Auto
appears in the display
Press plus(+) or minus(-) to enable or disable
the feature.
Press Start to accept the change.