Changing The Oven Light - LG SIGNATURE LUTG4519SN Manual Del Proprietário

Ocultar thumbs Ver también para LUTG4519SN:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

50 MAINTENANCE
After the Self Clean Cycle
The oven door remains locked until the oven
temperature has cooled.
You may notice some white ash in the oven. Wipe it
off with a damp cloth or a soap-filled steel wool pad
after the oven cools. If the oven is not clean after
one self-clean cycle, repeat the cycle.
If oven racks were left in the oven and do not slide
smoothly after a self-clean cycle, wipe racks and
rack supports with a small amount of vegetable oil
to make them glide more easily.
Fine lines may appear in the porcelain because it
went through heating and cooling. This is normal
and will not affect performance.
NOTE
The Self Clean cycle cannot be started if the
Lockout feature is active.
Once the Self Clean cycle is set, the oven door
locks automatically. You will not be able to open
the oven door until the oven is cooled. The lock
releases automatically.
Once the door has been locked, the lock
indicator light stops flashing and remains on.
Allow about 15 seconds for the oven door lock
to activate.
If the clock is set for a 12-hour display (default)
the Delayed Self Clean can never be set to
start more than 12 hours in advance.
After the oven is turned off, the convection
fan keeps operating until the oven has cooled
down.

Changing the Oven Light

The oven light is a standard 40-watt appliance bulb. It
turns on when the oven door is open. When the oven
door is closed, touch Start to turn it on or off.
WARNING
Make sure that the oven and bulb are cool.
Disconnect the electrical power to the range at
the main fuse or circuit breaker panel. Failure
to do so can result in severe personal injury,
death, or electrical shock.
1
Unplug the range or disconnect power.
2
Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
3
Turn the bulb counterclockwise to remove it from
the socket.
4
Insert the new bulb and turn it clockwise.
5
Insert the glass bulb cover and turn it clockwise.
6
Plug in the range or reconnect the power.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido