LevelOne FCS-1020 Guía De Instalación Rápida página 6

For the first time configuration, please enter the default
password "1234" and click "OK" to access to the IP setup
page.
FCS-1020/WCS-2020 IP Network Camera is working through
the network (TCP/IP Protocol). The IP address setting must be
correct, or you cannot access to the camera. The wizard
program will detect the IP address status of your network
automatically and suggest a free IP address for the Camera.
You can accept the suggested value or enter the value
manually. If you enter the value manually, please be aware that
the subnet must be the same for both the camera and the PC.