Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2 PRELIMINARY OPERATIONS
2.1 LOADING THE PELLETS
The rst operation to be performed before starting the appliance is to ll the hopper with fuel (pellets).
The pellets are loaded into in the hopper using a scoop.
Do not empty the sack directly into the hopper so as to avoid loading sawdust or other foreign bodies that may
affect proper stove operation and avoid spilling pellets outside of the hopper.
2.2 POWER SUPPLY
Plug the stove into the mains power supply. If the connections are correct the stove will emit a series of
intermittent beeps, the display will come on.
For long periods of disuse, we recommend disconnecting the stove completely from its power supply.
2.3 INITIAL SETTINGS
Current date and time need to be set before using the stove.
2.3.1
To set the date:
a) Use the
b) Use the
button to select the password "7" and then press
c) Use the
button to scroll to and select submenu
d) The hour value will ash; set the value using the
e) The minutes value will ash; set the value using the
f) The day value will ash; set the value using the
g) The month value will ash; set the value using the
h) The year value will ash; set the value using the
i) The current weekday value will ash (Monday = 1... Sunday = 7); set the value using the
j) Press
to con rm the settings.
2.3.2
The data shown on the display when this is in standby mode can be set.
a) Use the arrow buttons
b) Use the
button to select the password "7" and then press
c) Use the
button to scroll to and select submenu
d) Set one of the following values using the
"OFF" •
The display remains on the last operation set by the user;
•
All operating parameters are displayed cyclically;
"1"
•
The room or water probe temperature is shown, based on the type of con guration
"2"
•
The current time is shown
"3"
•
The operating autonomy in hours before having to re ll the hopper is
"4"
" lling" has been activated.
e) Press
to con rm the settings.
buttons to go to the setup menu
to go to the setup menu
and press
;
to con rm;
[3]
and press
to con rm;
buttons and press
buttons and press
buttons and press
buttons and press
buttons and press
and then press
to con rm;
[12]
and press
to con rm;
and
buttons:
;
;
;
;
;
buttons;
;
shown, If the function
21
Publicidad
Capítulos
Tabla de contenido
