Plantronics DUOSET WITH FIREFLY Manual Del Usuario página 10

UK
DIAGRAM KEY
1 Adjustable Headband
2 T-Bar
3 Receiver
4 Ear Cushion
5 Clothing Clip
6 Headset Cable
7 Boom
The headset boom features an In Use Indicator which, when used in
conjunction with the CA40 DECT Adapter, will flash to visually notify
your co-workers that you are talking on the telephone using a headset.
The boom also features a noise-cancelling microphone.
HEADSET ASSEMBLY: OVER-THE-HEAD
To identify headset components, please refer to the above
diagram key (1-14). For assembly instructions, please refer to
the diagrams A-F on page 3.
Fig. A Attach the ear cushion to the receiver ensuring that the two
notches on the ear cushion align with the boom.
Fig. B Insert the ball joint of the headband into the socket on the back
of the receiver.
Fig. C Plug the 2.5mm connector into the headset port of the CA40
DECT Adapter.
Fig. D Place the headband over the top of your head with the ear
cushion resting comfortably on your ear. The T-bar should be
positioned above your other ear. If necessary the length of the
headband can be adjusted. The headset can be worn with the
receiver on either ear – simply position the receiver on the
appropriate ear and rotate the boom into a suitable position.
7
8 Noise-Cancelling Microphone
9 In Use Indicator
10 Pivot Ball Ring
11 Mounting Socket
12 Earloop
13 Earloop Point
14 Earloop Cable Retainers