Installing And Adjustment Instructions - Alcad GRF-204 Manual De Instrucciones

V I D E O P O R T E R O E L E C T R Ó N I C O - V I D E O D O O R E N T R Y S Y S T E M S - V I D É O P O R T I E R É L E C T R O N I Q U E
INSTRUCCIONES DE INSTALACIÓN Y AJUSTE

INSTALLING AND ADJUSTMENT INSTRUCTIONS

INSTRUCTIONS D'INSTALLATION ET DE RÉGLAGE
1
If you wish to fix the entrance panel to a wall, it is
necessary to have previously installed a means of
attachment (i.e. a flush-mounted box or surface
wall-mounted box). See the appropriate data sheets.
3
Remove the protecting plugs and the fixing pins
from the flush-mounted box. Choose the two fixing
pins you want to hinge the panel on to, so that it
opens either to the right or to the left or downwards.
2
Once the flush-mounted box has been put in place,
remove the reinforcement.
4
Place the rings of the panel over the extracted fixing
pins. The unused pins should be placed in their
slots.