Basic Installation - Alcad GRF-204 Manual De Instrucciones

V I D E O P O R T E R O E L E C T R Ó N I C O - V I D E O D O O R E N T R Y S Y S T E M S - V I D É O P O R T I E R É L E C T R O N I Q U E
INSTALACIÓN BÁSICA - BASIC INSTALLATION - INSTALLATION STANDARD
ESQUEMA UNIFILAR - SINGLE-WIRED DIAGRAM - SCHÉMA À UN FIL
SECTION TABLE
Up to 25 m -
Up to 100 m -
Use separate cable hose.
Section according to the number of monitors/telephones in the dwelling.
Funcionamiento - Operation - Fonctionnement
Configure the panel as the main entrance panel (Leave J1 jumper in place), see step 6 on page 14.
SYSTEM ON STANDBY
The monitors/telephones are inactive (the functions of door opening and of communication with the entrance panel are disabled). It is
possible to activate the monitor's automatic switch-on system
SYSTEM ACTIVATED. MAKING A CALL
Only the monitors/telephones associated to the push-button will receive the call. Confirmation of the call on the entrance panel. If the
handset of the monitor/telephone called is off the hook or there is no monitor/telephone associated with that push-button, intermittent
tones will be heard at the entrance panel.
Time setting to answer: 30 seconds.
Maximum time setting for conversation: 60 seconds. Extension of time for conversation: + 60 seconds.
W