Cardin Elettronica S508 Manual De Instrucciones página 19

• Deleting the entire code memory content (users)
- Press and hold down the
- While the memory content is being cancelled the symbol
flashing.
- Release the keys. End of operation.
• Memorizing more transmitters by using a previously memorised transmitter.
This procedure allows you to enable a new transmitter (from a remote position) with the help of
a transmitter that has already been memorised in the system. As the presence of the receiver
is not required this procedure can be carried out in any remote location (for example in your
chosen sales outlet).
• The 'rapid memorization function' will either be enabled or disabled according to the value set in
the "PP" parameter:
- to enable the function, press and hold down the
four seconds;
- the symbol will appear on the display confirming that the function has been enabled;
- to disable the function, press and hold down the
least four seconds;
- the symbol will appear on the display confirming that the function has been disabled;
- the completion of the operations using the 'rapid memorization function' will be confirmed by the
buzzer sounding a single beep and the message
if a transmitter has been replaced appearing on the display;
- the received command will be carried out straight away.
+ keys for more than 4 seconds on the receiver
MEMO DEL
MEMO
19
will appear on the display
and keys simultaneously for at least
and keys simultaneously for at
MEMO
if a transmitter has been added or